BROTHER # TN-450 TONER – USA Made
$25.00
BROTHER TN450 TN420 TONER REMANUFACTURED
Printers: BROTHER TN450/TN420 – DCP7060/DCP7065/FAX2840/FAX2940/MFC7240/MFC7360/MFC7460/MFC7860/HL2230/HL2240/HL2240/HL2270/HL2275/HL2280
Replaces: TN-450/TN-420
TDLaser Part Number: B-TN450
Page Yield: UP TO 2600 PAGES
Color: BLACK
Includes: 1 CARTRIDGE
Type: REMANUFACTURED
Brand: TD LASER
Notes: ORIGIN: USA – TAA COMPLIANT
Comments: TD LASER REMANUFACTURED TONER CARTRIDGES ARE TAA COMPLIANT AND HAVE BEEN DEVELOPED AND TESTED TO PROVIDE PREMIUM PRINT QUALITY AND OEM-EQUIVALENT PAGE YIELDS.
Technical Support: People who use Brother Printers, which use TN-420 or TN-450 toner cartridges, might encounter toner error messages such as “Toner Low”, “Replace Toner” or “Toner Life End”. As the screen shows the cartridge you are using is empty or not recognized, you think you have to replace a new toner cartridge, or you can not continue printing. But after installing a new cartridge, the problem still exists, and you will find that this happens with both OEM and compatible laser toner cartridges. It doesn’t mean the cartridge you bought is damaged, the reason is the cartridge didn’t reset properly, so the printer couldn’t recognize it as a new one. Don’t worry, it is easy to reset:
RESET for Brother DCP/MFC Series:
– Open the front cover of the toner/drum section of the printer.
– Press the Clear/Back button and the following message should appear on the LCD display “Replace Drum? 1. Yes, 2. No”
– Reset the counter in the following procedure by printer model and toner type.
MFC models with numeric keypads
TN420 standard toner: Press the *, 1 and 1 button in this order
TN450 high yield toner: Press the *, 1 and 2 buttons in this order
Unknown Toner Type: Press the *, 0 and 0 buttons in this order
DCP models with numeric keypads:
TN420 standard toner: Press the “Start” button, and press “arrow up” or “arrow down” button to display “11” on the LCD display. Then press the “OK” button.
TN450 high yield toner: Press the “Start” button, and press “arrow up” or “arrow down” button to display “12” on the LCD display. Then press the “OK” button.
Unknown Toner Type: Press the “Start” button, and press “arrow up” or “arrow down” button to display “00” on the LCD display. Then press the “OK” button.The message “Accepted” should appear on the LCD display.
After 2 seconds, “Cover Open” will appear on the LCD display.
Close the front cover and the operation is now completed.
For Brother HL Series:
Turn the power of the printer off.
Open the front cover of the toner/drum section of the printer.
Press and hold the “Go” button while turning on power to the printer.
Release the “Go” button after “Toner, Drum, and Error” LEDs turn on with the “Ready” LED
